• 0 |
Shopping Cart x
Nothing in your cart yet!

Check out our Name Brands or browse all products to get ideas

5.11 Tactical Series

Sabre 2.0 Jacket

More savings!
5.11 Tactical 48112, Sabre 2.0 Jacket
Show Picture 1Show Picture 2Show Picture 3Show Picture 4
5.11 Tactical SeriesStyle48112
 $249.99
 

DARK NAVY color chip
DARK NAVY
BLACK color chip
BLACK
MOSS color chip
MOSS
COYOTE color chip
COYOTE
Selected: None
Qty:
 
  • Printable product summary
  • Email this product to a friend
 
Features
Size Chart
Reviews
Guarantee

5.11 Tactical Sabre 2.0 Jacket #48112

  • 100% Microfiber Softshell.
  • 10K/10K Waterproof Breathable, Fully Seamsealed.
  • Seam Sealed Chest Pockets.
  • Detachable and Storable Snap-on Hood.
  • QUIXIP™– Quick access side seam zips.

If you have worn the original 5.11 Sabre Jacket, you are going to love the new Sabre 2.0.

With its upgraded fully waterproof, completely breathable, seam sealed membrane this jacket is sure to outperform almost every jacket on the market today. The new updated mesh and nylon liner has been added for more breathability than ever, while still maintaining its fast undercover and conceal carry look.

Upgraded YKK fully waterproof zippers in a matte finish, allow for a sleek and fast look. Increases in size to the shoulder patches allow for larger or multiple patches. With its new updated front vertical chest pockets and back up belt system compatible hand warmer pockets, this jacket has more storage than ever. Add to that the right and left shoulder pockets and this jacket can store just about anything.

With its two front pull out ID panels and one large back ID panel, you can go from a covert to overt operation in seconds. An updated fit and storable or removable hood that is completely waterproof for extra protection. A vertical zipped back pocket right near the lumbar was also added for storage if you choose to remove the hood or not roll it up in the collar.

And for one of the final additions, the new Quixip side access system allows for conceal and covert carry, for the quickest access to a concealed sidearm on the market today.

Properly-fitted tactical gear not only keeps you looking professional, but also keeps you feeling comfortable for your entire shift. See below for advice on taking accurate measurements.

5.11 Tactical Series - Men's Apparel

All measurements in inches.

Size XS S M L XL 2XL 3XL 4XL 5XL 6XL
Chest 30-32 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64 66-68
Neck 13-13.5 14-14.5 15-15.5 16-16.5 17-17.5 18-18.5 19-19.5 20-20.5 21-21.5 22-22.5
Waist 24-26 28-30 32-34 36-38 40-42 44-46 48-50 52-54 56-58 60-62
Arm
Length*
32.25-
32.75
33-
33.5
33.75-
34.25
34.5-
35
35.25-
35.75
36-
36.5
36.75-
37.25
37.5-
38
38.25-
38.75
39-
39.5

Short or "S": 5' 3" to 5' 7.5"; Regular or "R": 5' 8" to 6' 1"; Tall or "T": 6' 1" to 6' 5". Tall sizes have 2" added to body and sleeve length.

5.11 Men's Pants Sizes may be expressed as either "waist x inseam" (e.g. "34-36" for 34-inch waist with 36-inch inseam) or as "size x fit" ("XL-R" for size XL Regular). See below for measuring advice.

*Arm Length refers to your actual arm length, not the garment's sleeve length.

5.11 Tactical Series - Women's Apparel

5.11 Size XS S M L XL
Numeric 2-4 6-8 10-12 14-16 18-20
Chest 32.5-33.5 34.5-35.5 36.5-38 39.5-41 43-45
Waist 25-26 27-28 29-30.5 32-33.5 35.5-37.5
Hip 35.5-36.5 37.5-38.5 39.5-41 42.5-44 44-46
Arm Length* 29.75-30.25 30.5-31 31.25-31.75 32-32.5 32.75-33.25

Regular: 5' 5" to 5' 7"; Tall: 5' 8" to 5' 11". Tall sizes have 2" added to body length and 1.5" added to sleeve length.

5.11 Women's Pants Sizes typically expressed as "ready-to-wear size x fit" (e.g. "10-T" for size 10 Tall).

*Arm Length refers to your actual arm length, not the garment's sleeve length.

Measuring for Proper Fit

Men - Taking measurementsThe following guidelines are important in getting the right fit:

  • Take all measurements in inches
  • If your measurements are between sizes, order the larger size
  • For greatest accuracy, have someone else take your measurements (rather than doing it yourself)
  • Your tape measure should be pulled snug, not tight
For Men's shirts:
  • NECK: Measure the circumference of the neck (see illustration)
  • SLEEVE LENGTH: Place one end of tape at the bottom of your collar, at the center of your back, then measure down around your elbow to the bottom of your wrist (it helps to have your arm slightly bent)
  • CHEST: Measure at the fullest point of the chest, keeping the tape under arms and around shoulder blades; Be sure to hold the tape level and firmly, but not tight
For Men's trousers, jeans, and bib overalls:
  • WAIST: Holding the tape snug, not tight, measure at the top of the hipbone over shirt (not over pants); If you wear your trousers or jeans at a different place on your waist, adjust accordingly
  • INSEAM: Measure from the base of the crotch to the top of your shoe or boot; For jeans, add one inch
For Men's jackets:
  • CHEST SIZE: Measure at the fullest point of the chest, keeping the tape under arms and around shoulder blades; Take this measurement over clothing you'll typically wear with the jacket
  • SLEEVE LENGTH: Place one end of tape at the bottom of your collar, at the center of your back, then measure down around your elbow to the outer edge of your wrist
If you're not 100% satisfied, we'll make things right. Period.
We do everything we can to ensure your satisfaction, right from the get-go! At Work 'N Gear...
  1. You'll only see brands with the highest reputation for quality, durability, and comfort
  2. We carefully screen individual styles for real-life, pro-grade performance
  3. You get great value for your dollar; You'll never feel cheated!
To us, 100% satisfaction means just that. If you're only 99-and-change% satisfied, please let us know. Whether by reimbursement, replacement, or exchange we will make things square.
So order with confidence! Check out these links for even more info: